Price: on request
Our Fiberfix refractory anchors are round in shape and offer dimensional stability. With the possibility of a hand weld, Rapid Arc Weld and threaded version these anchors suit any refractory fiber lining (mats, boards and etc.).
Use the FFH in combination with an LFF end clip or CFF ceramic cuplock/BER Bearing Ring to secure your fibre insulation. For multiple fibre layers use a SILICON MTC intermediate clip to keep the underlying layers in place during installation
Most often, the fixing mats, boards and other materials, the following fire-resistant fixing materials are used:
FFT
| Min. | Max. |
Length , mm | 50 | 550 |
Length of thread, mm | 10 | 25 |
LFF
Diameter, mm | 60 | 40 |
MTC
Marking | Diameter, mm |
MTC-025 | 3 |
MTC-035 | 4-5 |
MTC-045 | 5,25 - 6 |
MTC-065 | 7,12 - 8 |
MTC-082 | 8,9 - 10 |
MTC-104 | 10,8 |
MTC-115 | 12 |
Cuplocks for Fiberfix anchors (CFF) secure the fibre insulation and can optionally be filled with ceramic fibre mastic. It is locked in place by turning the cuplock in between the anchor notches. It can be used with a ceramic bearing ring (BER) for better support of the fibre layers.
Material: Mullite for applications up to 1300 0C.
The CFFD cuplock for Fiberfix anchors can be closed off with a cap to protect the metal anchor from external influences. It is locked in place by turning the cuplock in between the anchor notches. It can be used with a ceramic bearing ring (BER) for better support of the fibre layers.